In the fall of 2020 we will introduce the new XENTRY Diagnosis Kit 4 as the successor to XENTRY Diagnosis Kit 3.
XENTRY Diagnosis Kit 4 consists, as usual, of two components: XENTRY Diagnosis Pad 2 and XENTRY Diagnosis VCI. The device concept is comparable with that of its predecessor XENTRY Diagnosis Kit 3.

XENTRY Diagnosis Kit 4 now offers many more advantages in comparison to XENTRY Diagnosis Kit 3.
Easier to use
  • The display is a 13.3 inch, multitouch, full HD display with a brightness of 400 nits.
  • XENTRY Diagnosis Pad 2 comes with four USB type A 3.0 ports and one USB type C port
  • Located on the front side are two buttons that you can configure individually using ConfigAssist
  • To provide a more stable WiFi connection to XENTRY Diagnosis VCI, a second WiFi card has been installed, the WiFi stick in the XENTRY Diagnosis Pad 2 has been discontinued.
Much faster
  • XENTRY Diagnosis Pad 2 comes with the latest Intel® CoreTM i5 processor (1.6 GHz, turbo up to 3.9 GHz)
  • The main memory has 16 GB DDR4
  • 1 TB SSD hard drive (with 3000 MB/s read and write speed)
More convenient
  • The connection to XENTRY Diagnosis VCI is made using a permanently installed WLAN card.
  • XENTRY Diagnosis Pad 2 is passively cooled and therefore it does not have a fan.
  • XENTRY Diagnosis Pad 2 can be run on battery power for up to 8 hours.
XENTRY Diagnosis Pad 2 technical data
Operating system Windows 10 IoT LTSC Enterprise
Processor Intel® CoreTM i5
Main memory 16 GB DDR4
Hard drive 1 TB SSD
Display 13.3", full HD multitouch, brightness 400 nits, resolution 1920 x 1080, antiglare
Dimension Wait approx. 338 x 240 x 33 mm (W x L x H)
Weight 2.3 kg
XENTRY Diagnosis VCI
The VCI used so successfully before in XENTRY Diagnosis Kit 3 is also part of the scope of supply for XENTRY Diagnosis Kit 4.
Product advantages
  • Practical multiplexer in a compact and sturdy design (no PC core, battery, fan, or display)
  • No more diagnosis updates required – only firmware updates on rare occasions
  • Can be used for all model series
  • Does not require an adapter for external power supply
XENTRY Diagnosis VCI technical data
Network connection  
Cabled USB 2.0
WiFi stick 802.11b/g/n
Processor system  
Microprocessor Intel MX6 Solo
ROM 512 MB flash
User interface  
LEDs 5 status LEDs
Power supply*  
From the vehicle battery via the diagnosis connection cable
or via a connected USB cable.
8 V to 28 V
*Important: The contact socket in the vehicle must be protected with a fuse with a maximum rating of 6 A/32 V.
Should you have any questions about the product, please contact the customer support center.

Log in to the systems WIS, ASRA

Username :
Password :


Quick Start